A NoiseSnare layered with clever use of aliasing artifacts to make metalic overtones.

A Glitch Machine, great for sequenced glitchy percussions including an optional synth/bass section for a melodic touch!

a bunch of stuff I also uploaded to bitwiggers (check bitwiggers for descriptions of each one)

Create random synth sounds by clicking a button and tweak the generated parameters using bipolar knobs. Based on different instances of Polymer and only uses Bitwig devices. If you're lucky, you'll get a cool sound :) How to use: Click the "New Sound" button to generate a fresh sound. Slightly adjust all parameters with the bipolar knob macros. Turning the button off resets the device to its default state (essentially mute). Turn it back on to generate a new sound. FYI: There might be a Bitwig bug, if the sound generation stops working, try holding a MIDI note on your keyboard while pressing the button.

a bunch of stuff I also uploaded to bitwiggers (check bitwiggers for descriptions of each one)

Here is a little sample switcher you can use to switch between different types of kicks. If you bind it to a controller you can change your kicks on the fly.

A template to drop in any sample, enable looping and use the remote controls to affect the grain generation, window size and overall adsr. The release of chords is a little funky if not all notes are released at the same time, might be best to use a multinote for chords and only supply mono note input. Note that bitwig support told me this is basically abusing the midi standard, so expect that the audio engine to sometimes break on v4.3.10 at least, lower rate/density seems to break less.

Updated granular sampler template to work around bitwig simultaneous voice behaviour

This is a snare generator (particularly for drum and bass) made with only stock Bitwig devices. Clicking the Random button will make it so it generates a new snare within every note. When satisfied with a snare, Unclick the random button to keep the snare same. Made by Rannument

This is a Randomizable snare maker. 5 instances of Phase-4, Minimal post processing and Whola lotta random modulators. When you come across to a snare you like, Disable the Random button to keep the snare as it is

Uses arp + note length to generate grains, as well as humanize, randomize and random modulators to spread grains in different ways. Drop in your own sample, enable looping and tweak the start playhead position Use the ADHSR in the Sampler to control aspects of the grain window shape. The 'Main ADSR' modulator is mainly for controlling monophonic attack/decay of the sound.

Template for the sampler that has note fx set up to act like a granular synth. Drop in your own sample and use the controls to affect the grain generation

Splits incoming notes into three layers - the lowest note, the highest note and everything else in-between. Change out the instruments in each layer to whatever you want.

This preset splits the incoming notes into the lowest note, the highest note and the remainder in-between. The instrument presets on each of the layers can be replaced with whatever sounds you want

Slow Pad with Wind

A windy pad built on top of a sample bounced out of NI Kontour, which is a pretty cool phase modulation and distortion synth built inside Reaktor.

A dual-sample layer pad with a blade runner kind of vibe. Meant to be fed into your favorite reverb, best with a LOT of whatever that reverb is, added on.

A snaremaker device made by Rannument

I made an instrument layer preset that generates random snares from each note press. Everything is stock devices

Variation on <@320603795560333321> comb electric piano with an arp, and bitwig organ making a thing that's fun to play with two note widely spaced intervals (try octaves, and then move one finger at a time)

Instrument layer with arp

Cathedral like synthesized Organ Sound (very drenched in reverb)

A two layer pad with aftertouch and expression (CC1) mapped. contains a sample from a Pigments preset by me, plus a tweaked polymer factory preset (analong rain).

Vangelis on Ambien. A pad preset using Instrument Layer, containing a sampled pad I made in pigments (you don't need pigments to use this preset) and a tweaked Polymer pad from the factory library. CC1 (expr) and aftertouch, route into your favorite reverb, and set sail for dreamland.

Based on the Prophet-5 patch used throughout Radiohead's Everything In Its Right Place To mimic double tracking the patch uses two instances of polysynth hard panned, and the humanise note fx to randomise note timing Use 'Original pitch' button on second preset page to tune closer to the original track.

Key sound trying to mimic the main part from Radiohead's Everything In Its Right Place. I think it sounds pretty close, but would be closer if the envelopes in polysynth were a little bit snappier. Open for suggestions on how to improve it though!

Generates rain sounds for ambients in realtime... Customize it how you want. Try it!🌧️

This turns the lowest octave into a modulator you can assign to a parameter.

Might as well also share this here. This turns the lowest octave into a 0-1 modulator while leaving the rest of the signal unaffected. You could use this to add keyswitches-like functionality to a plugin that normally doesn't support that.

Just some grids making a Vinyl Crackling effect... because why not? 💫

Configurable piano with nostalgic sound

I made this configurable nostalgic sounding piano (no dependencies except Bitwig's built-in devices) Here's what it sounds like: https://soundcloud.com/sebastianrobert/basement-piano-ping-pong/s-eMqgl53mYHm https://soundcloud.com/sebastianrobert/basement-piano-spook/s-fBkclP29oyS Here's what the interface looks like: https://i.imgur.com/zHjmVVn.png There are 7 settings: * release * sustain * space * wide (Makes it a bit wider) * spook (Adds a spooky choir effect) * chorus * ping-pong (Side-chained ping pong effect)

Wobbly crispy neuro bass

Wobbly neuro bass with crunchy peaks

Rotating between four sound sources using LFO's. Rate, beat mode and shape can be controlled at the remote controls for some nice rhythmical variations. To use, put your sound sources into the respective chain devices for each sound source and set levels appropriately. Please enjoy! //Moonkin

Rotating between four sound sources using LFO's. Rate, beat mode and shape can be controlled at the remote controls for some nice rhythmical variations. To use, put your sound sources into the respective chain devices for each sound source and set levels appropriately. Please enjoy! //Moonkin

hi i have a update reverb + delay 2 at guitar ballad arp instrument layer 😃

arp + polygrid 😃

One finger chords with micro tuned thirds

Talking about chord patches on the main channel with <@!216530256146857984> . This shows the Multi Note device and has a Mirco Pitch device setup to tune the thirds of every chord.

Hmm I made a go at the grain sampler, it's monophonic and a bit fiddly, but can create cool lofi grain sounds: